Overview

The GT3 RS 4.0 was based on the standard RS with the big change being under the rear lid. The engine borrowed heavily from the GT3 RSR racecar unit; indeed, the crankshaft was lifted straight from it. The bore of the GT3 engine was at its limit so the capacity increase from 3800cc to 3996cc was achieved by dint of upping the stroke from 76.4mm to 80.4mm. Power was up from 450bhp to 500bhp, with torque peaking at a 460Nm.

Bodywork and interior were similar to that of the previous RS, however lateral front air deflection vanes (flics) were added to increase front-end downforce and allow the rear wing to be more steeply raked, giving a total increase in downforce of 190kg at top speed.

Production was limited to 600 cars, finished in white.

How to spot

• Longitudinal stripe and unique graphics
• Front wheel arch extensions
• Wide rear arches
• Flics on front wings, in front of the arches

Specification

Capacity: 3996cc

Compression ratio: 12.6:1

Maximum Power: 500bhp @ 8250rpm

Maximum Torque: 460Nm @ 5750rpm

Brakes: Front: 380mm discs; rear: 350mm discs; servo assisted with ABS and PSM. PCCB optional

Suspension: Front: Lower wishbones and MacPherson struts with combined coil springs and dampers, plus anti-roll bar Rear: Multilink with combined coil springs and dampers, plus anti-roll bar

Wheels & Tyres: Front: 19x9J with 245/35ZR19 tyres. Rear: 19x12J with 325/30ZR19 tyres

Length: 4460mm

Width: 1852mm

Weight: 1360kg

Did you Know?

0-62mph: 3.9sec Top speed: 193mph